4" 2&3 Jaws Gear Puller |
AC 0004 |
| Jaw and Center Bolt Material: CR-V(#6140) |
| Capacity Range: 76-102mm |
| The jaws on this gear puller can be changed |
| to operate with 2 or 3 jaws with internal or external |
| pulling action. |
| Simply unscrew the knurled screw cap to |
| release spring and jaw cover, unhook the jaws and |
| replace as necessary. |
| Replace cover plate and tighten spring with knurled screw. |
| Keep clean and well oiled between uses. |
| Always use eye protection when using this gear puller. |
| | | |
7" 2&3 Jaws Gear Puller |
AC 0005 |
| Jaw and Center Bolt Material: CR-V(#6140) |
| Capacity Range: 76-178mm |
| The jaws on this gear puller can be changed |
| to operate with 2 or 3 jaws with internal or external |
| pulling action. |
| Simply unscrew the knurled screw cap to |
| release spring and jaw cover, unhook the jaws and |
| replace as necessary. |
| Replace cover plate and tighten spring with knurled screw. |
| Keep clean and well oiled between uses. |
| Always use eye protection when using this gear puller. |
